# tunefs -l enable /
FreeBSD supports security extensions based on the POSIX®.1e draft.
These security mechanisms include file system Access Control Lists ([_fs_acl]) and Mandatory Access Control (MAC). MAC allows access control modules to be loaded in order to implement security policies.
Some modules provide protections for a narrow subset of the system, hardening a particular service.
Others provide comprehensive labeled security across all subjects and objects.
The mandatory part of the definition indicates that enforcement of controls is performed by administrators and the operating system.
This is in contrast to the default security mechanism of Discretionary Access Control (DAC) where enforcement is left to the discretion of users.
This chapter focuses on the MAC framework and the set of pluggable security policy modules FreeBSD provides for enabling various security mechanisms.
After reading this chapter, you will know:
The terminology associated with the MAC framework.
The capabilities of MAC security policy modules as well as the difference between a labeled and non-labeled policy.
The considerations to take into account before configuring a system to use the MAC framework.
Which MAC security policy modules are included in FreeBSD and how to configure them.
How to implement a more secure environment using the MAC framework.
How to test the MAC configuration to ensure the framework has been properly implemented.
Before reading this chapter, you should:
Understand UNIX® and FreeBSD basics ([_basics]).
Have some familiarity with security and how it pertains to FreeBSD ([_security]).
|
Improper The examples contained within this chapter are for demonstration purposes and the example settings should not be implemented on a production system. Implementing any security policy takes a good deal of understanding, proper design, and thorough testing. |
While this chapter covers a broad range of security issues relating to the MAC framework, the development of new MAC security policy modules will not be covered.
A number of security policy modules included with the MAC framework have specific characteristics which are provided for both testing and new module development.
Refer to mac_test(4)
, mac_stub(4)
and mac_none(4)
for more information on these security policy modules and the various mechanisms they provide.
The following key terms are used when referring to the MAC framework:
compartment: a set of programs and data to be partitioned or separated, where users are given explicit access to specific component of a system. A compartment represents a grouping, such as a work group, department, project, or topic. Compartments make it possible to implement a need-to-know-basis security policy.
integrity: the level of trust which can be placed on data. As the integrity of the data is elevated, so does the ability to trust that data.
level: the increased or decreased setting of a security attribute. As the level increases, its security is considered to elevate as well.
label: a security attribute which can be applied to files, directories, or other items in the system. It could be considered a confidentiality stamp. When a label is placed on a file, it describes the security properties of that file and will only permit access by files, users, and resources with a similar security setting. The meaning and interpretation of label values depends on the policy configuration. Some policies treat a label as representing the integrity or secrecy of an object while other policies might use labels to hold rules for access.
multilabel: this property is a file system option which can be set in single-user mode using tunefs(8) , during boot using fstab(5) , or during the creation of a new file system. This option permits an administrator to apply different MAC labels on different objects. This option only applies to security policy modules which support labeling.
single label: a policy where the entire file system uses one label to enforce access control over the flow of data. Whenever multilabel is not set, all files will conform to the same label setting.
object: an entity through which information flows under the direction of a subject. This includes directories, files, fields, screens, keyboards, memory, magnetic storage, printers or any other data storage or moving device. An object is a data container or a system resource. Access to an object effectively means access to its data.
subject: any active entity that causes information to flow between objects such as a user, user process, or system process. On FreeBSD, this is almost always a thread acting in a process on behalf of a user.
policy: a collection of rules which defines how objectives are to be achieved. A policy usually documents how certain items are to be handled. This chapter considers a policy to be a collection of rules which controls the flow of data and information and defines who has access to that data and information.
high-watermark: this type of policy permits the raising of security levels for the purpose of accessing higher level information. In most cases, the original level is restored after the process is complete. Currently, the FreeBSD MAC framework does not include this type of policy.
low-watermark: this type of policy permits lowering security levels for the purpose of accessing information which is less secure. In most cases, the original security level of the user is restored after the process is complete. The only security policy module in FreeBSD to use this is mac_lomac(4) .
sensitivity: usually used when discussing Multilevel Security (MLS). A sensitivity level describes how important or secret the data should be. As the sensitivity level increases, so does the importance of the secrecy, or confidentiality, of the data.
A MAC label is a security attribute which may be applied to subjects and objects throughout the system.
When setting a label, the administrator must understand its implications in order to prevent unexpected or undesired behavior of the system.
The attributes available on an object depend on the loaded policy module, as policy modules interpret their attributes in different ways.
The security label on an object is used as a part of a security access control decision by a policy. With some policies, the label contains all of the information necessary to make a decision. In other policies, the labels may be processed as part of a larger rule set.
There are two types of label policies: single label and multi label. By default, the system will use single label. The administrator should be aware of the pros and cons of each in order to implement policies which meet the requirements of the system’s security model.
A single label security policy only permits one label to be used for every subject or object. Since a single label policy enforces one set of access permissions across the entire system, it provides lower administration overhead, but decreases the flexibility of policies which support labeling. However, in many environments, a single label policy may be all that is required.
A single label policy is somewhat similar to DAC as root
configures the policies so that users are placed in the appropriate categories and access levels.
A notable difference is that many policy modules can also restrict root
.
Basic control over objects will then be released to the group, but root
may revoke or modify the settings at any time.
When appropriate, a multi label policy can be set on a UFS file system by passing multilabel to tunefs(8)
.
A multi label policy permits each subject or object to have its own independent MAC label.
The decision to use a multi label or single label policy is only required for policies which implement the labeling feature, such as biba, lomac, and mls.
Some policies, such as seeotheruids, portacl and partition, do not use labels at all.
Using a multi label policy on a partition and establishing a multi label security model can increase administrative overhead as everything in that file system has a label. This includes directories, files, and even device nodes.
The following command will set multilabel on the specified UFS file system.
This may only be done in single-user mode and is not a requirement for the swap file system:
# tunefs -l enable /
|
Some users have experienced problems with setting the |
Since the multi label policy is set on a per-file system basis, a multi label policy may not be needed if the file system layout is well designed.
Consider an example security MAC model for a FreeBSD web server.
This machine uses the single label, biba/high, for everything in the default file systems.
If the web server needs to run at biba/low to prevent write up capabilities, it could be installed to a separate UFS/usr/local
file system set at biba/low.
Virtually all aspects of label policy module configuration will be performed using the base system utilities. These commands provide a simple interface for object or subject configuration or the manipulation and verification of the configuration.
All configuration may be done using setfmac, which is used to set MAC labels on system objects, and setpmac, which is used to set the labels on system subjects.
For example, to set the bibaMAC label to high on test
:
# setfmac biba/high test
If the configuration is successful, the prompt will be returned without error.
A common error is Permission denied which usually occurs when the label is being set or modified on a restricted object.
Other conditions may produce different failures.
For instance, the file may not be owned by the user attempting to relabel the object, the object may not exist, or the object may be read-only.
A mandatory policy will not allow the process to relabel the file, maybe because of a property of the file, a property of the process, or a property of the proposed new label value.
For example, if a user running at low integrity tries to change the label of a high integrity file, or a user running at low integrity tries to change the label of a low integrity file to a high integrity label, these operations will fail.
The system administrator may use setpmac to override the policy module’s settings by assigning a different label to the invoked process:
# setfmac biba/high test # setpmac biba/low setfmac biba/high test # getfmac testtest: biba/high
For currently running processes, such as sendmail, getpmac is usually used instead.
This command takes a process ID (PID) in place of a command name.
If users attempt to manipulate a file not in their access, subject to the rules of the loaded policy modules, the Operation not permitted error will be displayed.
A few FreeBSD policy modules which support the labeling feature offer three predefined labels: low, equal, and high, where:
low is considered the lowest label setting an object or subject may have. Setting this on objects or subjects blocks their access to objects or subjects marked high.
equal sets the subject or object to be disabled or unaffected and should only be placed on objects considered to be exempt from the policy.
high grants an object or subject the highest setting available in the Biba and MLS policy modules.
Such policy modules include mac_biba(4) , mac_mls(4) and mac_lomac(4) . Each of the predefined labels establishes a different information flow directive. Refer to the manual page of the module to determine the traits of the generic label configurations.
The Biba and MLS policy modules support a numeric label which may be set to indicate the precise level of hierarchical control.
This numeric level is used to partition or sort information into different groups of classification, only permitting access to that group or a higher group level.
For example:
biba/10:2+3+6(5:2+3-20:2+3+4+5+6)may be interpreted as “Biba Policy Label/Grade 10:Compartments 2, 3 and 6: (grade 5 …” )
In this example, the first grade would be considered the effective grade with effective compartments, the second grade is the low grade, and the last one is the high grade. In most configurations, such fine-grained settings are not needed as they are considered to be advanced configurations.
System objects only have a current grade and compartment. System subjects reflect the range of available rights in the system, and network interfaces, where they are used for access control.
The grade and compartments in a subject and object pair are used to construct a relationship known as dominance
, in which a subject dominates an object, the object dominates the subject, neither dominates the other, or both dominate each other.
The “both
dominate”
case occurs when the two labels are equal.
Due to the information flow nature of Biba, a user has rights to a set of compartments that might correspond to projects, but objects also have a set of compartments.
Users may have to subset their rights using su or setpmac in order to access objects in a compartment from which they are not restricted.
Users are required to have labels so that their files and processes properly interact with the security policy defined on the system.
This is configured in /etc/login.conf
using login classes.
Every policy module that uses labels will implement the user class setting.
To set the user class default label which will be enforced by MAC, add a label entry.
An example label entry containing every policy module is displayed below.
Note that in a real configuration, the administrator would never enable every policy module.
It is recommended that the rest of this chapter be reviewed before any configuration is implemented.
default:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
:path=~/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:\
:manpath=/usr/share/man /usr/local/man:\
:nologin=/usr/sbin/nologin:\
:cputime=1h30m:\
:datasize=8M:\
:vmemoryuse=100M:\
:stacksize=2M:\
:memorylocked=4M:\
:memoryuse=8M:\
:filesize=8M:\
:coredumpsize=8M:\
:openfiles=24:\
:maxproc=32:\
:priority=0:\
:requirehome:\
:passwordtime=91d:\
:umask=022:\
:ignoretime@:\
:label=partition/13,mls/5,biba/10(5-15),lomac/10[2]:While users can not modify the default value, they may change their label after they login, subject to the constraints of the policy.
The example above tells the Biba policy that a process’s minimum integrity is 5, its maximum is 15, and the default effective label is 10.
The process will run at 10 until it chooses to change label, perhaps due to the user using setpmac, which will be constrained by Biba to the configured range.
After any change to login.conf
, the login class capability database must be rebuilt using cap_mkdb.
Many sites have a large number of users requiring several different user classes. In depth planning is required as this can become difficult to manage.
Labels may be set on network interfaces to help control the flow of data across the network.
Policies using network interface labels function in the same way that policies function with respect to objects.
Users at high settings in Biba, for example, will not be permitted to access network interfaces with a label of low.
When setting the MAC label on network interfaces, maclabel may be passed to ifconfig:
# ifconfig bge0 maclabel biba/equal
This example will set the MAC label of biba/equal on the bge0 interface.
When using a setting similar to biba/high(low-high), the entire label should be quoted to prevent an error from being returned.
Each policy module which supports labeling has a tunable which may be used to disable the MAC label on network interfaces.
Setting the label to equal will have a similar effect.
Review the output of sysctl, the policy manual pages, and the information in the rest of this chapter for more information on those tunables.
Before implementing any MAC policies, a planning phase is recommended.
During the planning stages, an administrator should consider the implementation requirements and goals, such as:
How to classify information and resources available on the target systems.
Which information or resources to restrict access to along with the type of restrictions that should be applied.
Which MAC modules will be required to achieve this goal.
A trial run of the trusted system and its configuration should occur before a MAC implementation is used on production systems.
Since different environments have different needs and requirements, establishing a complete security profile will decrease the need of changes once the system goes live.
Consider how the MAC framework augments the security of the system as a whole.
The various security policy modules provided by the MAC framework could be used to protect the network and file systems or to block users from accessing certain ports and sockets.
Perhaps the best use of the policy modules is to load several security policy modules at a time in order to provide a MLS environment.
This approach differs from a hardening policy, which typically hardens elements of a system which are used only for specific purposes.
The downside to MLS is increased administrative overhead.
The overhead is minimal when compared to the lasting effect of a framework which provides the ability to pick and choose which policies are required for a specific configuration and which keeps performance overhead down. The reduction of support for unneeded policies can increase the overall performance of the system as well as offer flexibility of choice. A good implementation would consider the overall security requirements and effectively implement the various security policy modules offered by the framework.
A system utilizing MAC guarantees that a user will not be permitted to change security attributes at will.
All user utilities, programs, and scripts must work within the constraints of the access rules provided by the selected security policy modules and control of the MAC access rules is in the hands of the system administrator.
It is the duty of the system administrator to carefully select the correct security policy modules. For an environment that needs to limit access control over the network, the mac_portacl(4) , mac_ifoff(4) , and mac_biba(4) policy modules make good starting points. For an environment where strict confidentiality of file system objects is required, consider the mac_bsdextended(4) and mac_mls(4) policy modules.
Policy decisions could be made based on network configuration.
If only certain users should be permitted access to ssh(1)
, the mac_portacl(4)
policy module is a good choice.
In the case of file systems, access to objects might be considered confidential to some users, but not to others.
As an example, a large development team might be broken off into smaller projects where developers in project A might not be permitted to access objects written by developers in project B.
Yet both projects might need to access objects created by developers in project C.
Using the different security policy modules provided by the MAC framework, users could be divided into these groups and then given access to the appropriate objects.
Each security policy module has a unique way of dealing with the overall security of a system.
Module selection should be based on a well thought out security policy which may require revision and reimplementation.
Understanding the different security policy modules offered by the MAC framework will help administrators choose the best policies for their situations.
The rest of this chapter covers the available modules, describes their use and configuration, and in some cases, provides insight on applicable situations.
|
Implementing |
The default FreeBSD kernel includes options MAC.
This means that every module included with the MAC framework can be loaded with kldload as a run-time kernel module.
After testing the module, add the module name to /boot/loader.conf
so that it will load during boot.
Each module also provides a kernel option for those administrators who choose to compile their own custom kernel.
FreeBSD includes a group of policies that will cover most security requirements. Each policy is summarized below. The last three policies support integer settings in place of the three default labels.
Module name: mac_seeotheruids.ko
Kernel configuration line: options MAC_SEEOTHERUIDS
Boot option: mac_seeotheruids_load="YES"
The mac_seeotheruids(4)
module extends the security.bsd.see_other_uids and security.bsd.see_other_gidssysctl tunables.
This option does not require any labels to be set before configuration and can operate transparently with other modules.
After loading the module, the following sysctl tunables may be used to control its features:
security.mac.seeotheruids.enabled enables the module and implements the default settings which deny users the ability to view processes and sockets owned by other users.
security.mac.seeotheruids.specificgid_enabled allows specified groups to be exempt from this policy. To exempt specific groups, use the security.mac.seeotheruids.specificgid=[replaceable]XXX`[command]sysctl tunable, replacing [replaceable]XXX`
security.mac.seeotheruids.primarygroup_enabled is used to exempt specific primary groups from this policy. When using this tunable, security.mac.seeotheruids.specificgid_enabled may not be set.
Module name: mac_bsdextended.ko
Kernel configuration line: options MAC_BSDEXTENDED
Boot option: mac_bsdextended_load="YES"
The mac_bsdextended(4)
module enforces a file system firewall.
It provides an extension to the standard file system permissions model, permitting an administrator to create a firewall-like ruleset to protect files, utilities, and directories in the file system hierarchy.
When access to a file system object is attempted, the list of rules is iterated until either a matching rule is located or the end is reached.
This behavior may be changed using security.mac.bsdextended.firstmatch_enabled.
Similar to other firewall modules in FreeBSD, a file containing the access control rules can be created and read by the system at boot time using an rc.conf(5)
variable.
The rule list may be entered using ugidfw(8) which has a syntax similar to ipfw(8) . More tools can be written by using the functions in the libugidfw(3) library.
After the mac_bsdextended(4) module has been loaded, the following command may be used to list the current rule configuration:
# ugidfw list0 slots, 0 rules
By default, no rules are defined and everything is completely accessible.
To create a rule which blocks all access by users but leaves root
unaffected:
# ugidfw add subject not uid root new object not uid root mode n
While this rule is simple to implement, it is a very bad idea as it blocks all users from issuing any commands.
A more realistic example blocks user1
all access, including directory listings, to user2
's home directory:
# ugidfw set 2 subject uid user1 object uid user2 mode n # ugidfw set 3 subject uid user1 object gid user2 mode n
Instead of user1
, not
uid [replaceable]user2` could be used in order to enforce the same access restrictions for all users.
However, the [username]root`
|
Extreme caution should be taken when working with this module as incorrect use could block access to certain parts of the file system. |
Module name: mac_ifoff.ko
Kernel configuration line: options
MAC_IFOFF
Boot option: mac_ifoff_load="YES"
The mac_ifoff(4)
module is used to disable network interfaces on the fly and to keep network interfaces from being brought up during system boot.
It does not use labels and does not depend on any other MAC modules.
Most of this module’s control is performed through these sysctl tunables:
security.mac.ifoff.lo_enabled enables or disables all traffic on the loopback, lo(4) , interface.
security.mac.ifoff.bpfrecv_enabled enables or disables all traffic on the Berkeley Packet Filter interface, bpf(4) .
security.mac.ifoff.other_enabled enables or disables traffic on all other interfaces.
One of the most common uses of mac_ifoff(4) is network monitoring in an environment where network traffic should not be permitted during the boot sequence. Another use would be to write a script which uses an application such as security/aide to automatically block network traffic if it finds new or altered files in protected directories.
Module name: mac_portacl.ko
Kernel configuration line: MAC_PORTACL
Boot option: mac_portacl_load="YES"
The mac_portacl(4)
module is used to limit binding to local TCP and UDP ports, making it possible to allow non-root
users to bind to specified privileged ports below 1024.
Once loaded, this module enables the MAC policy on all sockets.
The following tunables are available:
security.mac.portacl.enabled enables or disables the policy completely.
security.mac.portacl.port_high sets the highest port number that mac_portacl(4) protects.
security.mac.portacl.suser_exempt, when set to a non-zero value, exempts the root user from this policy.
security.mac.portacl.rules specifies the policy as a text string of the form rule[,rule,…], with as many rules as needed, and where each rule is of the form idtype:id:protocol:port. The idtype is either uid or gid. The protocol parameter can be tcp or udp. The port parameter is the port number to allow the specified user or group to bind to. Only numeric values can be used for the user ID, group ID, and port parameters.
By default, ports below 1024 can only be used by privileged processes which run as root
.
For mac_portacl(4)
to allow non-privileged processes to bind to ports below 1024, set the following tunables as follows:
# sysctl security.mac.portacl.port_high=1023 # sysctl net.inet.ip.portrange.reservedlow=0 # sysctl net.inet.ip.portrange.reservedhigh=0
To prevent the root
user from being affected by this policy, set security.mac.portacl.suser_exempt to a non-zero value.
# sysctl security.mac.portacl.suser_exempt=1
To allow the www
user with UID 80 to bind to port 80 without ever needing root
privilege:
# sysctl security.mac.portacl.rules=uid:80:tcp:80
This next example permits the user with the UID of 1001 to bind to TCP ports 110 (POP3) and 995 (POP3s):
# sysctl security.mac.portacl.rules=uid:1001:tcp:110,uid:1001:tcp:995
Module name: mac_partition.ko
Kernel configuration line: options MAC_PARTITION
Boot option: mac_partition_load="YES"
The mac_partition(4)
policy drops processes into specific “partitions”
based on their MAC label.
Most configuration for this policy is done using setpmac(8)
.
One sysctl tunable is available for this policy:
security.mac.partition.enabled enables the enforcement of MAC process partitions.
When this policy is enabled, users will only be permitted to see their processes, and any others within their partition, but will not be permitted to work with utilities outside the scope of this partition.
For instance, a user in the insecure class will not be permitted to access top as well as many other commands that must spawn a process.
This example adds top to the label set on users in the insecure class.
All processes spawned by users in the insecure class will stay in the partition/13 label.
# setpmac partition/13 top
This command displays the partition label and the process list:
# ps Zax
This command displays another user’s process partition label and that user’s currently running processes:
# ps -ZU trhodes
|
Users can see processes in |
Module name: mac_mls.ko
Kernel configuration line: options MAC_MLS
Boot option: mac_mls_load="YES"
The mac_mls(4) policy controls access between subjects and objects in the system by enforcing a strict information flow policy.
In MLS environments, a “clearance”
level is set in the label of each subject or object, along with compartments.
Since these clearance levels can reach numbers greater than several thousand, it would be a daunting task to thoroughly configure every subject or object.
To ease this administrative overhead, three labels are included in this policy: mls/low, mls/equal, and mls/high, where:
Anything labeled with mls/low will have a low clearance level and not be permitted to access information of a higher level. This label also prevents objects of a higher clearance level from writing or passing information to a lower level.
mls/equal should be placed on objects which should be exempt from the policy.
mls/high is the highest level of clearance possible. Objects assigned this label will hold dominance over all other objects in the system; however, they will not permit the leaking of information to objects of a lower class.
MLS provides:
A hierarchical security level with a set of non-hierarchical categories.
Fixed rules of no read up, no write down. This means that a subject can have read access to objects on its own level or below, but not above. Similarly, a subject can have write access to objects on its own level or above, but not beneath.
Secrecy, or the prevention of inappropriate disclosure of data.
A basis for the design of systems that concurrently handle data at multiple sensitivity levels without leaking information between secret and confidential.
The following sysctl tunables are available:
security.mac.mls.enabled is used to enable or disable the MLS policy.
security.mac.mls.ptys_equal labels all pty(4) devices as mls/equal during creation.
security.mac.mls.revocation_enabled revokes access to objects after their label changes to a label of a lower grade.
security.mac.mls.max_compartments sets the maximum number of compartment levels allowed on a system.
To manipulate MLS labels, use setfmac(8)
.
To assign a label to an object:
# setfmac mls/5 test
To get the MLS label for the file test
:
# getfmac test
Another approach is to create a master policy file in /etc/
which specifies the MLS policy information and to feed that file to setfmac.
When using the MLS policy module, an administrator plans to control the flow of sensitive information.
The default block read up block write
down sets everything to a low state.
Everything is accessible and an administrator slowly augments the confidentiality of the information.
Beyond the three basic label options, an administrator may group users and groups as required to block the information flow between them.
It might be easier to look at the information in clearance levels using descriptive words, such as classifications of Confidential, Secret, and Top Secret.
Some administrators instead create different groups based on project levels.
Regardless of the classification method, a well thought out plan must exist before implementing a restrictive policy.
Some example situations for the MLS policy module include an e-commerce web server, a file server holding critical company information, and financial institution environments.
Module name: mac_biba.ko
Kernel configuration line: options
MAC_BIBA
Boot option: mac_biba_load="YES"
The mac_biba(4)
module loads the MAC Biba policy.
This policy is similar to the MLS policy with the exception that the rules for information flow are slightly reversed.
This is to prevent the downward flow of sensitive information whereas the MLS policy prevents the upward flow of sensitive information.
In Biba environments, an “integrity” label is set on each subject or object. These labels are made up of hierarchical grades and non-hierarchical components. As a grade ascends, so does its integrity.
Supported labels are biba/low, biba/equal, and biba/high, where:
biba/low is considered the lowest integrity an object or subject may have. Setting this on objects or subjects blocks their write access to objects or subjects marked as biba/high, but will not prevent read access.
biba/equal should only be placed on objects considered to be exempt from the policy.
biba/high permits writing to objects set at a lower label, but does not permit reading that object. It is recommended that this label be placed on objects that affect the integrity of the entire system.
Biba provides:
Hierarchical integrity levels with a set of non-hierarchical integrity categories.
Fixed rules are no write up, no read down, the opposite of MLS. A subject can have write access to objects on its own level or below, but not above. Similarly, a subject can have read access to objects on its own level or above, but not below.
Integrity by preventing inappropriate modification of data.
Integrity levels instead of MLS sensitivity levels.
The following tunables can be used to manipulate the Biba policy:
security.mac.biba.enabled is used to enable or disable enforcement of the Biba policy on the target machine.
security.mac.biba.ptys_equal is used to disable the Biba policy on pty(4) devices.
security.mac.biba.revocation_enabled forces the revocation of access to objects if the label is changed to dominate the subject.
To access the Biba policy setting on system objects, use setfmac and getfmac:
# setfmac biba/low test # getfmac testtest: biba/low
Integrity, which is different from sensitivity, is used to guarantee that information is not manipulated by untrusted parties. This includes information passed between subjects and objects. It ensures that users will only be able to modify or access information they have been given explicit access to. The mac_biba(4) security policy module permits an administrator to configure which files and programs a user may see and invoke while assuring that the programs and files are trusted by the system for that user.
During the initial planning phase, an administrator must be prepared to partition users into grades, levels, and areas. The system will default to a high label once this policy module is enabled, and it is up to the administrator to configure the different grades and levels for users. Instead of using clearance levels, a good planning method could include topics. For instance, only allow developers modification access to the source code repository, source code compiler, and other development utilities. Other users would be grouped into other categories such as testers, designers, or end users and would only be permitted read access.
A lower integrity subject is unable to write to a higher integrity subject and a higher integrity subject cannot list or read a lower integrity object. Setting a label at the lowest possible grade could make it inaccessible to subjects. Some prospective environments for this security policy module would include a constrained web server, a development and test machine, and a source code repository. A less useful implementation would be a personal workstation, a machine used as a router, or a network firewall.
Module name: mac_lomac.ko
Kernel configuration line: options
MAC_LOMAC
Boot option: mac_lomac_load="YES"
Unlike the MAC Biba policy, the mac_lomac(4)
policy permits access to lower integrity objects only after decreasing the integrity level to not disrupt any integrity rules.
The Low-watermark integrity policy works almost identically to Biba, with the exception of using floating labels to support subject demotion via an auxiliary grade compartment.
This secondary compartment takes the form [auxgrade].
When assigning a policy with an auxiliary grade, use the syntax lomac/10[2], where 2 is the auxiliary grade.
This policy relies on the ubiquitous labeling of all system objects with integrity labels, permitting subjects to read from low integrity objects and then downgrading the label on the subject to prevent future writes to high integrity objects using [auxgrade].
The policy may provide greater compatibility and require less initial configuration than Biba.
Like the Biba and MLS policies, setfmac and setpmac are used to place labels on system objects:
# setfmac /usr/home/trhodes lomac/high[low] # getfmac /usr/home/trhodes lomac/high[low]
The auxiliary grade low is a feature provided only by the MACLOMAC policy.
This example considers a relatively small storage system with fewer than fifty users. Users will have login capabilities and are permitted to store data and access resources.
For this scenario, the mac_bsdextended(4) and mac_seeotheruids(4) policy modules could co-exist and block access to system objects while hiding user processes.
Begin by adding the following line to /boot/loader.conf
:
mac_seeotheruids_load="YES"The mac_bsdextended(4)
security policy module may be activated by adding this line to /etc/rc.conf
:
ugidfw_enable="YES"Default rules stored in /etc/rc.bsdextended
will be loaded at system initialization.
However, the default entries may need modification.
Since this machine is expected only to service users, everything may be left commented out except the last two lines in order to force the loading of user owned system objects by default.
Add the required users to this machine and reboot.
For testing purposes, try logging in as a different user across two consoles.
Run ps aux to see if processes of other users are visible.
Verify that running ls(1)
on another user’s home directory fails.
Do not try to test with the root
user unless the specific sysctls have been modified to block super user access.
|
When a new user is added, their mac_bsdextended(4) rule will not be in the ruleset list. To update the ruleset quickly, unload the security policy module and reload it again using kldunload(8) and kldload(8) . |
This section demonstrates the steps that are needed to implement the Nagios network monitoring system in a MAC environment.
This is meant as an example which still requires the administrator to test that the implemented policy meets the security requirements of the network before using in a production environment.
This example requires multilabel to be set on each file system.
It also assumes that net-mgmt/nagios-plugins
, net-mgmt/nagios
, and www/apache22
are all installed, configured, and working correctly before attempting the integration into the MAC framework.
Begin the procedure by adding the following user class to /etc/login.conf
:
insecure:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
:path=~/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin
:manpath=/usr/share/man /usr/local/man:\
:nologin=/usr/sbin/nologin:\
:cputime=1h30m:\
:datasize=8M:\
:vmemoryuse=100M:\
:stacksize=2M:\
:memorylocked=4M:\
:memoryuse=8M:\
:filesize=8M:\
:coredumpsize=8M:\
:openfiles=24:\
:maxproc=32:\
:priority=0:\
:requirehome:\
:passwordtime=91d:\
:umask=022:\
:ignoretime@:\
:label=biba/10(10-10):Then, add the following line to the default user class section:
:label=biba/high:Save the edits and issue the following command to rebuild the database:
# cap_mkdb /etc/login.conf
Set the root
user to the default class using:
# pw usermod root -L default
All user accounts that are not root
will now require a login class.
The login class is required, otherwise users will be refused access to common commands.
The following sh script should do the trick:
# for x in `awk -F: '($3 >= 1001) && ($3 != 65534) { print $1 }' \/etc/passwd`; do pw usermod $x -L default; done;
Next, drop the nagios
and www
accounts into the insecure class:
# pw usermod nagios -L insecure # pw usermod www -L insecure
A contexts file should now be created as /etc/policy.contexts
:
# This is the default BIBA policy for this system.
# System:
/var/run(/.*)? biba/equal
/dev/(/.*)? biba/equal
/var biba/equal
/var/spool(/.*)? biba/equal
/var/log(/.*)? biba/equal
/tmp(/.*)? biba/equal
/var/tmp(/.*)? biba/equal
/var/spool/mqueue biba/equal
/var/spool/clientmqueue biba/equal
# For Nagios:
/usr/local/etc/nagios(/.*)? biba/10
/var/spool/nagios(/.*)? biba/10
# For apache
/usr/local/etc/apache(/.*)? biba/10This policy enforces security by setting restrictions on the flow of information.
In this specific configuration, users, including root
, should never be allowed to access Nagios.
Configuration files and processes that are a part of Nagios will be completely self contained or jailed.
This file will be read after running setfsmac on every file system.
This example sets the policy on the root file system:
# setfsmac -ef /etc/policy.contexts /
Next, add these edits to the main section of /etc/mac.conf
:
default_labels file ?biba
default_labels ifnet ?biba
default_labels process ?biba
default_labels socket ?bibaTo finish the configuration, add the following lines to /boot/loader.conf
:
mac_biba_load="YES"
mac_seeotheruids_load="YES"
security.mac.biba.trust_all_interfaces=1And the following line to the network card configuration stored in /etc/rc.conf
.
If the primary network configuration is done via DHCP, this may need to be configured manually after every system boot:
maclabel biba/equalFirst, ensure that the web server and Nagios will not be started on system initialization and reboot.
Ensure that root
cannot access any of the files in the Nagios configuration directory.
If root
can list the contents of /var/spool/nagios
, something is wrong.
Instead, a “permission denied”
error should be returned.
If all seems well, Nagios, Apache, and Sendmail can now be started:
# cd /etc/mail && make stop && \ setpmac biba/equal make start && setpmac biba/10\(10-10\) apachectl start && \ setpmac biba/10\(10-10\) /usr/local/etc/rc.d/nagios.sh forcestart
Double check to ensure that everything is working properly. If not, check the log files for error messages. If needed, use sysctl(8) to disable the mac_biba(4) security policy module and try starting everything again as usual.
|
The # setpmac biba/10 csh To block this from happening, force the user into a range using login.conf(5)
.
If setpmac(8)
attempts to run a command outside of the compartment’s range, an error will be returned and the command will not be executed.
In this case, set root to |
This section discusses common configuration errors and how to resolve them.
multilabel flag does not stay enabled on the root (/ ) partitionThe following steps may resolve this transient error:
Edit /etc/fstab and set the root partition to ro for read-only.
Reboot into single user mode.
Run tunefs-l enable on / .
Reboot the system.
Run mount-urw/ and change the ro back to rw in /etc/fstab and reboot the system again.
Double-check the output from mount to ensure that multilabel has been properly set on the root file system.
MAC, Xorg no longer startsThis could be caused by the MACpartition policy or by a mislabeling in one of the MAC labeling policies.
To debug, try the following:
Check the error message. If the user is in the insecure class, the partition policy may be the culprit. Try setting the user’s class back to the default class and rebuild the database with cap_mkdb. If this does not alleviate the problem, go to step two.
Double-check that the label policies are set correctly for the user, Xorg, and the /dev entries.
If neither of these resolve the problem, send the error message and a description of the environment to the link:FreeBSD general questions mailing list.
\_secure_path: unable to stat .login_conf error appearsThis error can appear when a user attempts to switch from the root
user to another user in the system.
This message usually occurs when the user has a higher label setting than that of the user they are attempting to become.
For instance, if joe
has a default label of biba/low and root
has a label of biba/high, root
cannot view joe
's home directory.
This will happen whether or not root
has used su to become joe
as the Biba integrity model will not permit root
to view objects set at a lower integrity level.
root When this occurs, whoami returns 0 and su returns who are you?.
This can happen if a labeling policy has been disabled by sysctl(8)
or the policy module was unloaded.
If the policy is disabled, the login capabilities database needs to be reconfigured.
Double check /etc/login.conf
to ensure that all label options have been removed and rebuild the database with cap_mkdb.
This may also happen if a policy restricts access to master.passwd
.
This is usually caused by an administrator altering the file under a label which conflicts with the general policy being used by the system.
In these cases, the user information would be read by the system and access would be blocked as the file has inherited the new label.
Disable the policy using sysctl(8)
and everything should return to normal.